Determination of mechanical damage on soybean seed by clorox soak test

Article Sidebar

PDF
Published: Jan 15, 2024
Keywords:
Glycine max L. Damage seed Physiological quality Seed germination Seed vigor

Main Article Content

Baikaden, S.
Department of Plant Production Technology, School of Agricultural Technology, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.
Thepchit, K.
Department of Plant Production Technology, School of Agricultural Technology, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.
Buaket, T.
Department of Plant Production Technology, School of Agricultural Technology, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.
Sikhao, P.
Department of Plant Production Technology, School of Agricultural Technology, King Mongkut's Institute of Technology Ladkrabang, Bangkok 10520, Thailand.

Abstract

The Clorox soak test was assessed soybean seed damage, proving to be a comfortable and effective method for detection. Among different seed lots, the third lot exhibited the lowest percentage of damaged seeds. Notably, these seeds yielded seedlings with the highest root length, shoot length, and dry weight. Regarding damage levels, both undropped seeds and those dropped two times displayed the highest shoot length and seedling dry weight. Seed vigor  assessed through accelerated aging that showed Lot 2 of soybean seeds had the highest vigor across all damage levels.

Article Details

How to Cite
Baikaden, S., Thepchit, K., Buaket, T., & Sikhao, P. (2024). Determination of mechanical damage on soybean seed by clorox soak test. International Journal of Agricultural Technology, 20(1), 25–36. retrieved from https://li04.tci-thaijo.org/index.php/IJAT/article/view/12205
Issue
Vol. 20 No. 1 (2024): January
Section
Original Study
Creative Commons License

This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.

References

Aekaraj, C. (2003). Seed technology. Tamkasettakum Publishing, Nonthaburi, pp.197. (In Thai).

Albaneze, R., Villela, F. A., Possenti, J. C., Guollo, K. and Riedo, I. C. (2018). Mechanical damage caused by the use of grain carts for transport during soybean seed harvest. Journal of Seed Science 40:422-427.

AOSA (1983). Seed vigor testing handbook. Association of Official Seed Analysts, East Lasing, pp.88.

Chanprasert, W. (1995). Causes of seed deterioration. Seed physiology, Kasetsart University, Bangkok, pp.144. (In Thai).

Chanprasert, W. (1999). Seed quality and seed testing. Seed technology, Kasetsart University, Bangkok, pp.188. (In Thai).

Duangpatra, J. (1986). Seed testing and analysis. Seed technology, Department of Agronomy Faculty of Agriculture Kasetsart University, Bangkok, pp.146. (In Thail).

Gagare, K. C., Bharud, R. W., Shelar, V. R. and Karjule, A. P. (2014). Detection of mechanical damage to soybean seed surface using ferric chloride test. Agricultural Science Digest-A Research Journal, 34:289-292.

Goli, A., Khazaei, J., Taheri, M., Khojamli, A. and Sedaghat, A. (2016). Effect of mechanical damage on soybean germination. International Academic Journal of Science and Engineering 3:48-58.

Huang, J. W. (2023). Soybean Focus Report. Retrieved from https://www.cmegroup.com /articles/whitepapers/2023-soybean-focus-report.html

ISTA (2019). International rules for seed testing, Edition. 2010. International Seed Testing Association. Zurich, Switzerland.

Jothityangkoon, D. (2002). Seed quality testing. Seed Technology, Department of Agronomy, Faculty of Agriculture, Khon Kaen University (In Thai).

McDonald, Jr. M. B. (1985). Physical seed quality of soybean. Seed science and technology 13:601-628.

Neve, J. M., Oliveira, J. A., Silva, H. P. D., Reis, R. D. G., Zuchi, J. and Vieira, A. R. (2016). Quality of soybean seeds with high mechanical damage index after processing and storage. Revista Brasileira de Engenharia Agrícola e Ambienta 20:1025-1030.

ReportLinker (2023). Global soybean processing industry. Retrieved from https://www.reportlinker.com

Shahbazi, F., Saffar, A. and Analooei, M. (2011). Mechanical damage to pinto beans as affected by moisture content and impact energy. Agricultural Engineering International: CIGR Journal, 13(2).

Shahbazi, F., Sharafi, R., Moomevandi, S. J. and Daneshvar, M. (2015). Influence of foliar iron fertilization rate on the breakage susceptibility of wheat seeds. Journal of Plant Nutrition 38:2204-2216.

Silva, R. P. D., Teixeira, I. R., Devilla, I. A., Rezende, R. C. and Silva, G. C. (2011). Qualidade fisiológica de sementes de soja (Glycine max. L.) duranteo beneficiamento. Semina: Ciências Agrárias 32:1219-1230.

Souza, D. C., Albuquerque, M. C. D. F., Zorato, M. D. F. and Carvalho, D. D. C. (2009). Analysis of the mechanical damages and quality seeds cotton plant. Revista Brasileira de Sementes 31:123-131.

Taylor, A. G. (2013). Mechanical Damage of Seed. Handout of Seed Technology Course. College of Agriculture and Life Sciences, Cornell University, Geneva, New York.

USDA (2023). World agricultural supply and demand estimates. Retrieved from https://www.usda.gov/oce/commodity/wasde

VanUtrecht, D., Bern, C. J. and Rukunudin, I. H. (2000). Soybean mechanical damage detection. Applied Engineering in Agriculture, 16:137-141.