Computer applications for selecting operating parameters in a stationary grain crop thresher
Main Article Content
Abstract
In this study, various operating parameter influencing performance of a stationary grain crop threshers were established. These parameters were deduced from the established analytical models describing the underlying principles for the crop characteristics and machine variables as factors influencing the overall machine performance of a stationary multi-crop thresher by Olaoye (2004). A computer program written in Visual Basic was used to select optimum operating performance of the threshing process in a stationary tooth - peg grain crop thresher. An IITA - popularized stationary multi- crop thresher was used to test the practical feasibility of the computer based output of the threshing process. A split - split - unit statistical design was used for data collection. The data collected were analysed using the GENSTAT 5 statistical package with its computer program. The results showed that graphs of data from measured thresher performance indices against the predicted data for all the established models indicated high correlation between the models and the measured data at p ≤ 5 % significance level. The minimum energy requirements for detachment of sorghum and rice were observed at the threshing cylinder speed of 500 rpm (10.5 m/s) and 615 (13.0 m/s) rpm, respectively. The combination of the threshing cylinder speed of 500 rpm (10.5 m/s) and 615 rpm (13.0 m/s) at crop moisture content of 12.8 % and 16.2 % indicated optimum threshing conditions for sorghum and rice, respectively.
Article Details
This work is licensed under a Creative Commons Attribution-NonCommercial-NoDerivatives 4.0 International License.
References
Behera, B.K., Dash, S.K. and Das, D.K. (1990). Development and Testing of a power operated wheat thresher Agricultural Mechanization in Asia, Africa and Latin America AMA 21(4); 15-21.
Desta, K. and Mishra, T.N. (1990). Development and performance Evaluation of a Sorghum thresher. Agricultural Mechanization in Asia, Africa and Latin America (AMA). 21(3): 33-37.
Ghaly, A.E. (1985). A stationary threshing machine: Design Construction and performance Evaluation Agricultural Mechanization in Asia, Africa and Latin America AMA. 16(3); 19-30.
Isaacson, E.D. st Q. and Isaacson, M. dest Q. (1975). Dimensional methods in Engineering and Physic. Edward Arnod publisher Ltd, London.
Joshi, H.C. (1981). Design and selection of Thresher parameter and components. Agricultural Mechanization in Asia, Africa and Latin America AMA. 21(3): 29-32.
Menasce, d.a., V.A.F. Almeida and Dowdy, L.W. (1994). Capacity planning and performance modeling; from main frames to client server systems. Pentice Hall, PTR, Englewood clifts. Klein, L.M.
Ndirika, V.I.O. (1993). Development and performance evaluation of a millet thresher. Journal of Agricultural Technology, 1: 2 -10.
NSAE/NCAM/SON. (1995). Nigeria standard Test code for Grain and seed cleaners. Grian Harvesters, and maize sheller, Nigeria Agricultural Engineering standards for the Nigerian society of Agricultural Engineers. Sponsored by National centre for Agricultural mechanization and standards organization of Nigeria.
Olaoye, J.O. and Oni, K.C. (2001). Some Physical and Mechanical Properties of Selected Grain Crops. Proceedings of the 2nd International Conference & 23rd Annual General Meeting of the Nigerian Institution of Agricultural Engineers (A division of NSE); 23:315-329.
Olaoye, J.O. (2002). Performance modeling of a Multipurpose crop threshing machine for Assessment of grain loss. Being an aspect of the research findings for the 1997 Senate Research Grant, at University of Ilorin, Ilorin Nigeria.
Olaoye, J.O. (2004). An Analytical modeling of the performance of tooth peg grain crop thresher. PH.D Thesis, Department of Agricultural Engineering and Bio-systems, University of Ilorin, Ilorin, Nigeria.
Saeed, M.A.; Khan, A.S., Rizvi, H.A. and Tanveer, T. (1995). Testing and Evaluation of Holdon paddy thresher. Agricultural Mechanization in Asia, Africa and Latin America AMA. 2692; 47-51.
Snedecor, G.W. and Cochram, W.G. (1980). Statistical methods. 7th Edition. Iowa state university press. Ames, LOwa. USA. 507 pp.
Singh, K.N. and Singh, B. (1981) Effect of crop and machine parameters on threshing effectiveness and seed quality of soybean, Journal of Agricultural Engineers Research JAER. 17:23-28.
